🦈 How To Charge Your Canon Camera Without A Charger

For example, ask online users about the places in the area where they can charge their camera battery. Don’t try to charge Canon camera battery without a proper charger. Don’t be tempted to charge the Canon camera battery using a charger that isn’t designed for it. The procedure for using a USB cable to charge the included battery is explained below. 1. Slide the cover and open it . 2. While pressing the battery lock in the direction of the arrow, insert the battery as shown and push it in until it clicks into the locked position. Cost about $22, including shipping. (Lost the charger in a recent move, and had your USB question too, now answered.) Note: my camera has a 5.3v DC in, adjacent to an AV out port under a door on the side. Looks like the male plug would be novel, not something likely kept on hand. Check the user manual to learn the light codes. Most cameras use the following colors: An amber, yellow, or red light indicates a battery that's currently charging. A blue or green light usually means the battery is charged. A blinking light sometimes indicates a charging error; other times, it indicates a battery that is still charging. I know that the package contains a battery charger supplied from the residential voltage (in my case, and irrelevant to subject, 120 VAC). However, when I am camping in the wilderness, the battery charger is not an option. I used to charge my smart phone and a previous camera from a source with four AA batteries and a USB output. In other words Put your camera’s battery on and switch off the camera. Your camera and USB cable should be connected and then plug in the power bank USB’s end to the other. If your camera comes with an LCD panel at the top that displays the battery icon, you can monitor the amount of battery being charged. Usually, the light at the lower right corner of In summary: you will be able recharge the battery of a Canon EOS 60D camera without a charger. For this you must use the cable USB supplied with purchase from your camera. It will allow you to recharge the battery with a computer or an external battery. ← Previous Article. Next article. When charging is finished, the access lamp turns off. Supplying power. To power the camera without charging batteries, set the camera power switch to or . However, batteries are charged during auto power off. The battery level indicator is gray when power is supplied. To change from powering the camera to charging, set the camera power switch to . 1. Remove the protective cover. To prevent short circuiting of the electrical contacts, be sure to attach the cover to the battery when you remove the battery from the camera. 2. Attach the battery securely to the battery charger. To detach the battery, follow the above procedure in reverse. 3. Recharge the battery. Charge the battery. Flip out the charger prongs as shown and plug the charger into a power outlet. Connect the power cord to the charger and insert the plug into a power outlet. Charging starts automatically and the charge lamp (1) lights up in orange. When the battery is fully charged, the full-charge lamp (2) will light up in green. If you have a battery that you don't have a charger for, don't worry you can still charge it. All you need is a USB cable that you are willing to cut. Warn Charged batteries gradually lose their charge, even when they are not used. Charge the battery on (or immediately before) the day of use. The charger can be used in areas with 100 240 V AC power (50/60 Hz). For power outlets in a different format, use a commercially available adapter for the plug. .

how to charge your canon camera without a charger